Steel Rule DieBoard Kerf Cutters, Ultra - 5-flute
Specifications:
- Flute geometry - 5 flute
- Tip geometry - fish tail point
- Overall Length - OAL - 38.10 mm (1.5") ±0.25 mm
- Flute diameter - d -
- 1.3 pt - 0.46 mm ±0.01 mm
- 1.5 pt - 0.53 mm ±0.01 mm
- 2 pt - 0.71 mm ±0.01 mm
- 3 pt - 1.07 mm ±0.01 mm
- 4 pt - 1.42 mm ±0.01 mm
- 6 pt - 2.13 mm ±0.01 mm
- Shank diameter - D - 3.175 mm (1/8") +0.00 -0.005 mm
- Deflection compensation - nominal ±0.05-0.10 mm
- Runout - TIR - max. 0.005 mm
- Depth Of Cut - DOC -
- 9.70 mm (0.380") ±0.10 mm
- 11.70 mm (0.460") ±0.10 mm
- Parallel (drag) kerf depth - 2.50 mm
- Anticipated Life:
- 8 mm birch plywood - 380-500 rm (max.700)
- 8 mm maple plywood - 180-300 rm
- Material - solid submicrograin carbide
- Operating CNC - 20k÷100k RPM
- Country of Origin - USA
Benefits:
- Cuts 8 mm Baltic birch plywood at 40-60 mm/s @ 40,000 RPM
- 9.70 mm Depth Of Cut (DOC) tools are available with CloseKerf© flute geometry for unprecedented closeness in rule placement
- 5 flute geometry insures long life, and low deflection at high feed rates
- Fish tail point eliminates backside breakout and splintering
- Variable helix design provides more efficient chip extraction and minimizes top surface fuzz and splintering
- Cutting edge geometry eliminates tearing and pulling, yielding smooth, precise edges and sidewalls
- Our 2 and 3 point kerf cutters have been designed to meet the varying needs of diemakers working in different areas of the packaging industry
- The"Low-deflection" bit is optimized to cut at 50-60 mm/s @ 40,000 RPM with less than 0.10 mm tip deflection
- The "Close-kerf" tool has been designed to allow rule placement on 2.54 mm centers (8 mm Baltic birch plywood) with a tip deflection of less than 0.10 mm while cutting at 40-45 mm/s @ 40,000 RPM
Applications:
- Cutting kerf slots in steel-rule die-boards
- Clean-up cutter for fine inlay pocket finishing
